Home Energy Services & Duct Cleaning Contractor Milford, DE

Frank had his home tested for radon when he initially purchased it.  He wasn’t worried because he was told his level was 3pCi/L so he thought his home was “safe”.  A few years later he tested again “out of curiosity”--other neighbors that had moved in the neighborhood had installed mitigation systems.  He was told his reading was a 5.7pCi/L.  

We explained that the radon level in your home can fluctuate.  Even is you register an average of below the World Health Organization’s recommended level of 2.7pCi/L, that doesn’t mean your level will always remain below that number.

Since the family used the basement of the home often they wanted to take action.  The basement had been finished already but luckily we still had access to a good portion of their floating slab concrete floor.  

In the end we sealed as much of the basement floor as we had access to and installed a mitigation system with a properly sized fan to help decrease the level of radon in their home.

Lawrence and Joanne M. are homeowners in the town of Milford, DE.  When they decided they wanted to expand their kitchen vents to the exterior, they knew it wasn’t going to be an everyday task.  The couple decided to enlist the help of Dr. Energy Saver Delmarva after seeing positive reviews about them.

Shortly after contacting them, the couple was met by Delmarva representative Raymond Bremmerman.  The couple showed him the kitchen and explained the work they wanted done.  Raymond further evaluated the kitchen and other areas and concluded that more areas needed work, such as re-insulating parts of the attic and adding fans in the vents towards the exterior.  Raymond recommended for their attic that they install dense pack TruSoft 2” x 4” vinyl sliding and TruSoft blown in cellulose insulation.  For the couples kitchen, Raymond recommended routing fans in the newly extended vents to the exterior.  With the recommendations agreed upon, Raymond called upon Production Team One to install the necessary products.  

With the products installed, Lawrence and Joanne now have extended vents and a well insulated attic and its all thanks to the professionals at Dr. Energy Saver Delmarva!

Milford homeowner Earnest B. was looking for a solution to his faulty attic.  Knowing that it was only a matter of time before it was costing him more money than he could handle, he decided to enlist professional assistance. After seeing an ad for Dr. Energy Saver Delmarva in the newspaper he decided to take to the internet to check out their services.  He liked what he saw and gave them a call that same day.  

Earnest was soon met by energy efficiency specialist Michael Brittingham at his Milford home.  Earnest explained to Michael that he was having problems with his attic and wanted him to take a look at it.  Michael evaluated the attic and deduced that the previously installed insulation was wearing thin and needed to be replaced.  Michael took Earnest into his attic, pointed out the faulty insulation, and suggested Earnest install TruSoft blown-in cellulose insulation; a long lasting, densely-packed solution.  Along with this a 2” SilverGlo rigid foam and radiant barrier would be installed to ensure the energy would be kept within the confines of the home.  Finally Michael noted that the whole attic would be air sealed for an added layer of protection.

Earnest was very impressed at the professionalism shown by Michael and asked for the products to be installed.  Michael enlisted the help of Delmarva’s very own Production Team One to complete the installation process.  With the attic freshly insulated, Earnest’s energy efficiency problems should be a thing of the past!